Great Marker Light Replacements for Avions!

We needed to find a good source for our 1987 32S front and rear marker lights.

Amber in front (4) plus one centered on curbside near awning roller cover….

( 3 ) red lenses in rear.

2020-04-15 16.49.54
Front of our 1987 32S, Rockguard removed so we could more easily work on the marker light project AND for replacement of all window glass bead (seals, etc.) June 2020
20200414_135837
Front

 

Below is the excellent new product we found that fits perfectly to the 3″ on center and continues to be the same style as the originals with the rubber base and slip in lenses.

https://www.easternmarine.com/rubber-body-mount-amber-marker-light-1506ad?fbclid=IwAR3ZU7WNOMLPoDsqfUivnJtwQhGQVPClhDZL96hLh30_VPYixcEfs_ub314

I have put this photo specifically in below to show how we use a thin bead of Parbond along the top and 1/2 to 3/4 the way down each side of ANY light, or any fixed object, plate, etc. that must be installed on the exterior of the Avion.  This protects those vulnerable areas (now that have screws or rivets through the skin) from water penetration.

Kevin used 5/32 Olympic Rivets to secure the fixture in place.

20200607_131800
Notice the aluminum colored bead of Parbond along the top and part way down each side to prevent water penetration into fixture or rivet holes. (Rivets were dipped in Parbond before install.

So very often, as was the case with our ’73 Avion and now in our ’87, because of a lack of Parbond or similar sealant above the light fixtures, water gets in there, rusts the bulb clips and in some cases aids to corrode the wiring junctions.  A few seconds of Parbond application (see our other posts or our FB page about the fill-able syringes we use to feed a nice thin bead-rather than straight from the tube!)  solves water penetration issues.  Parbond sets up firm, but not permanent and can be removed. We use the aluminum color on this type of project, and clear Parbond on our black rubber window trims.  Clear could certainly be used on the light fixture project too.  Any other things you may have to afix to the side, e.g. an aluminum patch, etc. we recommend using the aluminum colored Parbond if the area will be eye level or lower.  This is what Chuck Cayo used when repositioning our awning brackets when we changed from an original Carefree system on our ’73 to a new Zipdee system in 2018.  So if its good for Avion-Guru, Cayo…it works for us too!!

2019-04-22 18.20.172018-09-02 17.21.24

Last step on this project….

These marker lights come with incandescent, typical automotive bulbs.  Fine enough and what is shown in the lit up photo above.  However, we plan to change out EACH of these lights with LED bulbs to save energy, burn cooler and even brighter, and above all…so we get far longer life out of each bulb and should not need to do much maintenance at all with them.

We have worked with M4Products.com customer service AND the makers of the light fixtures to verify that the following small style LED bulb replacement will work in these new marker light fixtures.

https://m4products.com/ba9s-3d-2-cw-cool-white-led-light-bulb-with-mini-round-base/?fbclid=IwAR3qDP3lLHlLJ1fMBP5Sy2ZdqiZfkJqBdZQMnbjckg0PwXXOi06TeJRnxUo

We hope this post has helped you with this project!  Let us know!

Be well, travel safe, enjoy the journey!

Kevin & Luisa Sherman, thankfully Covid-19 free!

Publication1

6 thoughts on “Great Marker Light Replacements for Avions!”

  1. I noticed my 5 red lights need replacing. There seems to be rust running down from them. I think they are 77-825 and where can I find the replacements?

    Like

    1. Jan, the 70s models may have different than our 87. I believe i did a blog post on our 197 marker lights too a couple of years ago. Try a search for “lights ” on our blog. If memory serves me right we ordered ours from vintage trailer supply. Ours were more that bullseye type as they call them but we have a feeling they were not original to the 73 but right size and looked fine.

      Like

    1. Dustin,
      I can get u a photo of our switch plate near door but not till next week. Sorry. In the meantime, i know what they go to but just not sure of correct order. So here is what the 4 switches go to our our 87, 32S model. (A)center ceiling fixture in kitchen (B) porch and step lights outside (C) ceiling light just inside door, small like a reading lamp (D) the small low to the floor courtesy half hooded night lights in living room bottom front of TV cabinet, in bathroom, in hallway. Hope this helps for now.

      Like

Leave a Reply to Hector Murray Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s